Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
3x8 Multi-Switch (Powered)w/Antenna - 1 satellites in / 8 output
Customer Reviews & Ratings:
Description:
The S.133-CP 3in/8out distribution system with SAT inputs switched by 13/18V has a built-in amplifier for terrestrial input. It can be used either with "Dual" or "Twin" LNB. The multi switch does not transmit 22 KHz signal for high band reception and does not pass 22 KHz tone from receivers. So the usage is 1 satellite for any 8 satellite receivers (must be connected to power).
Features:
Important Notes:
- We have not tested this switch with DishPro LNBFs. (Any LNBFs with built-in switch may not work.)
- This switch must be installed indoor (If you are planning to use this switch outdoor then it MUST be installed in proper housing, so water won't get in. Please note that warranty is void if damaged by water.)
- This switch is powered and works in Canada/USA.
- You must have DUAL PORT (exits) LNBF to make this work. You will take 2 cables from LNBF. (1 cable for Horizontal, and 1 for Vertical - 13V, 18V)
- When connecting/disconnecting receivers, you MUST unplug the receivers, otherwise switch can be shorted.




















