Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
5x4 Multi-Switch (Powered)w/Antenna - 2 satellites in / 4 output
Customer Reviews & Ratings:
Description:
The S.142-CP is a 5in/4out distribution system switch with built-in amplifier for terrestrial input and integrated power supply. So, it is a four customer distribution system that can work with two dual or twin LNBs, quatro or Quad LNB. The multi switch allows connection of 4 different LNB signal (polarities) switched by 13/18V and 22 KHz signal so it is possible to view all channels on satellite receiver connected to the system. The internal 22 KHz generator allows utilization of quad LNB. Signals from terrestrial TV and FM aerials can be fed into the fifth input (terrestrial input). The input level can be adjusted by attenuators in range of 15dB.
Features:
Important Notes:
- We have not tested this switch with DishPro LNBFs. (Any LNBFs with built-in switch may not work.)
- We have only tested this switch for FTA receivers.
- This switch is powered and works in Canada/USA.
- When connecting/disconnecting receivers, you MUST unplug the receivers, otherwise switch can be shorted.
- This switch must be installed indoor (If you are planning to use this switch outdoor then it MUST be installed in proper housing, so water won't get in. Please note that warranty is void if damaged by water.)
- You must have DUAL PORT (exit) LNBFs to make this work. You will take 2 cables from each LNBF. (1 cable for Horizontal, and 1 for Vertical - 13V, 18V)




















