Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
9x4 Multi-Switch (Powered)w/Antenna - 4 satellites in / 4 output
Customer Reviews & Ratings:
Description:
The compact P.154-CP multi switch is designed for customer's signal distribution installations from two satellite positions for 4 subscribers, including terrestrial radio and TV programs. This type is currently produced in CP version, i.e. with the possibility of switching between active and passive passage of terrestrial signals.
It has grounding connector and 22 kHz tone that can be switched on at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad. It also allows power supply into a masthead amplifier from terrestrial input.
It has grounding connector and 22 kHz tone that can be switched on at the upper band inputs using miniature lever switches to allow for correct function of LNB Quad. It also allows power supply into a masthead amplifier from terrestrial input.
Features:
Important Notes:
- We have not tested this switch with DishPro LNBFs. (Any LNBFs with built-in switch may not work.)
- We have only tested this switch for FTA receivers.
- This switch is powered and works in Canada/USA.
- When connecting/disconnecting receivers, you MUST unplug the receivers, otherwise switch can be shorted.
- This switch must be installed indoor (If you are planning to use this switch outdoor then it MUST be installed in proper housing, so water won't get in. Please note that warranty is void if damaged by water.)
- You must have DUAL PORT (exit) LNBFs to make this work. You will take 2 cables from each LNBF. (1 cable for Horizontal, and 1 for Vertical - 13V, 18V)




















