Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
9x8 Multi-Switch (Powered)w/Antenna - 4 satellites in / 8 output
Customer Reviews & Ratings:
Description:
The S.155-CP multi switch allows connection of 8 different LNBs signal (polarities). It has DiSEqc 2.0 distribution system for indoor use with integrated power supply that can work with quatro LNBs, or even with four dual or twin LNBs. The input level can be set by attenuators in range of 15dB. Using a built-in switch, it is also possible to send the command "22 KHz" or DiSEqc 1.0 Write NO command "High Band" to selected SAT inputs for high band continuously. In this case it is possible to connect also twin universal or quad LNBs to the inputs.
This is truly a 9 inputs distribution system for up to 8 subscribers with a built-in amplifier for terrestrial input.
This is truly a 9 inputs distribution system for up to 8 subscribers with a built-in amplifier for terrestrial input.
Features:
Important Notes:
- We have not tested this switch with DishPro LNBFs. (Any LNBFs with built-in switch may not work.)
- We have only tested this switch for FTA receivers.
- This switch is powered and works in Canada/USA.
- When connecting/disconnecting receivers, you MUST unplug the receivers, otherwise switch can be shorted.
- This switch must be installed indoor (If you are planning to use this switch outdoor then it MUST be installed in proper housing, so water won't get in. Please note that warranty is void if damaged by water.)
- You must have DUAL PORT (exit) LNBFs to make this work. You will take 2 cables from each LNBF. (1 cable for Horizontal, and 1 for Vertical - 13V, 18V)




















