Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
Featured Brands
DP-34 Dish Network Switch
By Dishnetwork Approved Switches
Customer Reviews & Ratings:
Description:
*USED* Dish Network DP-34 Switch (previously used, not refurbished!)It has 3 orbital locations and 4 tuner outputs.
Special consideration
- Can only be used with DishPro LNBFs (DishPro Twin LNBF for 2 orbital
locations (110 and 119), DishPro Twin LNBF with a DishPro single LNBF
for 3 orbital locations or up to 3 DishPro Single LNBFs).
- When used with a DishPro Twin, the LNBF operates in its default state:
one port provides 110 and one port provides 119. Either port of the
DishPro Twin can be connected to any two LNBF ports of the DP-34 switch.
- Tuner outputs: Dish 301 and Dish 501 have one tuner and would use one
DP-34 tuner output; Dish 721 has two tuners and would use two DP-34
tuner outputs.
- Up to 3 DP-34 switches can be "trunked" together for connections up to
12 tuner inputs (12 single tuner receivers (Dish 301 or Dish 501) or a
combination of single tuner receivers and two tuner receivers (DishPVR 721)).
- There must be at least one DishPro receiver (or a legacy receiver with a
DishPro Adapter) connected to the switch at all times to provide power.
The receiver can be connected to any receiver port on the DP-34 switch.
- DishPro installations can support up to 200' RG-6 cable lengths, from the
LNBFs to the furthest receiver. DP-34 switches can be placed anywhere
in the installation but placement closer to the receivers is recommended.
- Two styles of DP-34 switches will be sold. Both switches provide identical
features and functionality but have different exterior cosmetics.
Legacy Receivers
- A "legacy" receiver (non-DishPro receivers, released before Dish 301)
can be connected to a DishPro DP-34 switch when used with a DishPro Adapter.
Features:
- The first switch in the new DishPro technology series of LNBFs and switches- Three inputs for use with up to 3 orbital locations
- Four outputs for connections up to 4 tuner inputs
- Three "trunk" connections, to "trunk" to another DP-34 switch
- Does not require power insertion
- Can be used indoors or outdoors
- DishPro switches may be cascaded 3 switches deep and are DiSEqc compatible
Customers who bought this product also purchased
WWS Store
GTA Electronics
7222 Torbram Rd,Unit 16 Mississauga,
Ontario L4T 3V2
(905)-461-2179
My Account
Support
Company
Sitemap
