Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
Dishnetwork Approved Switches
Sort By: Product NameLowest PriceHighest PriceRatingDisplaying 9 products |
|
Dish Network SW-44 Legacy Multi-Switch W/Power Inserter The Legacy SW44 Multi-Dish Switch allows you to receive signals from 2 satellites dishes and route these signals to a 4 satellite receivers. This 2 dish 4 receiver automatic dish switch works with original Dishnet/Bell express VU.... Rating: |
|
|
Dish Pro Plus Seperator The Dish Pro Plus Seperator is used to separate a single line from a Dish 500 DPP twin LNB into two lines for use with DPP separator compatible two-input Dish Network receivers. DC & Diseqc Pass, 950-2150 MHz.... Rating: |
|
|
DishPro Adapter **Sold Out** This DishPro adapter will allow your legacy receivers to use the new DishPro LNBs. It is required for all Dish Network receivers: 1000, 2000, 2700, 2800, 3000, 3700, 3800, 3900, 4000, 4700, 4900, 5000, 6000, 7100, 7200 and newer, when used in conjunction with DishPro LNBFs.... Rating: |
|
|
DP-34 Dish Network Switch *USED* Dish Network DP-34 Switch (previously used, not refurbished!)It has 3 orbital locations and 4 tuner outputs.Special consideration- Can only be used with DishPro LNBFs (DishPro Twin LNBF for 2 orbital locations (110 and 119), DishPro Twin LNBF with a DishPro... Rating: |
|
|
SW-21 Digiwave Dishnet Switch The SW-21 single receiver automatic dish switch from Digiwave connects a single satellite receiver to two single LNB dish or one Dish 500 dish.... Rating: |
|
|
SW-21 Original Dishnet Switch The SW-21 Original Dishnet Switch allows you to receive signals from two different LNBs into one receiver. This is mostly used with the Dish 500 to receive both the 100 and 119 West satellites. It is waterproof and comes with zinc die case housing.... Rating: |
|
|
SW-21X Dishnet Switch The SW-21X Dishnet switch works in conjunction with the SW-21 videopath switch. It allows you to connect a third satellite into a Dish Network or Bell ExpressVu receiver. The third satellite can be either 61.5, 148 or 121. This switch is waterproof and comes in zinc die case... Rating: |
|
|
SW-31 Multi Switch The SW31 switch can be used to retrieve satellite signals from Dishnet at 110, 119 and 148 or 61.5 degrees.... Rating: |
|
|
SW-64 Multi-Switch W/Power Inserter - 3 sats in / 4 outputs The SW-64 automatic multi dish switch allows you to connect up yo four receivers to two or three dual LNB dishes, or to one Dish 500 with two dual LNBs alongside another dish with one dual LNB. Besides that, you can also add another dish to an existing Dish 500 system for... Rating: |
| Displaying 9 products |

































