Products
- Free To Air Receivers
- OTA - Over the Air TV
- IPTV - Internet TV
- Remote Control
- Satellite Dishes
- Wireless Networking
- Tripods & Mounts
- LNB'S & Brackets
- Satellite Motors
- Satellite Finders
- Switches & Amplifiers
- Cables
- Connectors
- Installation Supplies
- A / V & Remote Extenders
- USB Memory
- Other Accessories
- Other Electronics
EMP-Centauri FTA Switches
Sort By: Product NameLowest PriceHighest PriceRatingDisplaying 24 products |
|
1 Sat + 1 Terr. Combiner (Diplexer) The E.105 diplexer is satellite and terrestrial combiner and splitter. This unit combines satellite and terrestrial signals into one output or splits the combined signal from one input into 2 outputs, especially into satellite and terrestrial signals. The satellite input/output... Rating: |
|
|
13x12 Multi-Switch(Powered)w/Antenna - 6 sats in / 12 output The S.160-CP-12 13x12 multi switches has 13 inputs distribution system for up to 12 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqc 2.0 compatible device for indoor use with an integrated power supply. It allows the use of 3 Quatro or up to 6... Rating: |
|
|
13x16 Multi-Switch(Powered)w/Antenna - 6 sats in / 16 output The S.160-CP-16 13x16 multi switches has 13 inputs distribution system for up to 16 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqc 2.0 compatible device for indoor use with an integrated power supply. It allows the use of 3 Quatro or up to 6... Rating: |
|
|
13x4 Multi-Switch(Powered)w/Antenna - 6 sats in / 4 output The compact P.160-CP-4 multi switch is an ideal choice for
those who are interested in signal reception from 3
satellite positions. The offer includes versions for 4, 6, 8, 12
and 16 subscribers, where either AP variant with passive
passage of... Rating: |
|
|
13x8 Multi-Switch(Powered)w/Antenna - 6 sats in / 8 output The S.160-CP-8 multi switches has 13 inputs distribution system for up to 8 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqc 2.0 compatible device for indoor use with an integrated power supply. It allows the use of 3 quatro or up to 6 dual or... Rating: |
|
|
17x12 Multi-Switch(Powered)w/Antenna - 8 sats in / 12 output The S.170-CP-12 multi switch has 17 inputs distribution system for up to 12 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqc 2.0 compatible device for indoor use with an integrated power supply. It allows the use of 4 quatro or up to 8 dual or... Rating: |
|
|
17x16 Multi-Switch (Powered)w/Antenna - 8 sats in / 16 output The S.170-CP-16 multi switches with 17 inputs distribution system for up to 16 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqC 2.0 compatible device for indoor
use with an integrated power supply. It allows use of 4
Quatro or up... Rating: |
|
|
17x4 Multi-Switch(Powered)w/Antenna - 8 sats in / 4 output P.170 product line was designed to meet the highest
requirements of contemporary market. There is no need to
compromise whenever reception from 3 or 4 satellites is
required. This unit, P.170-CP-4, allows up to 4 users to get all programming (both... Rating: |
|
|
17x8 Multi-Switch(Powered)w/Antenna - 8 sats in / 8 output The S.170-CP-8 17x8 multi switches with 17 inputs distribution system for up to 8 subscribers with a built-in amplifier for terrestrial input. This unit is DiSEqC 2.0 compatible device for indoor
use with an integrated power supply. It allows use of 4
Quatro or... Rating: |
|
|
22KHz Weatherproof FTA Switch - 2 satellites in / 1 output The 2 in 1 out DiSEqC 2.0 switch in weatherproof housing for connection of 2 satellite positions to 1 receiver. The inputs of the switch are controlled from a receiver by "Position" command and are through for 22 KHz and DiSEqC signals (P.162-IW (S2/1PCNpos-W1)..This product is... Rating: |
|
|
2x1 Diseqc Weatherproof FTA Switch - 2 satellites in / 1 out The S.162-CW DiSEqc 2.0 2in/1out switch. The inputs are controlled by the Write NO 'Position' command or by Tone Burst. It allows connection of 2 satellite dishes to 1 satellite receiver and is going through for 22 KHz and DiSEqc signals.It comes with weatherproof housing. After... Rating: |
|
|
3x4 Multi-Switch w/Antenna - 1 satellite in / 4 output The E.134-A 3in/4out distribution system which can be used in connection either with "Dual" or "Twin" LNB. SAT inputs are switched by 13/18V from each satellite receiver. The multi switch does not transmit 22 KHz signals for high band reception and does not pass 22 KHz tone from... Rating: |
|
|
3x4 Multi-Switch(Powered)w/Antenna - 1 satellites in / 4 output The S.132-CP 3in/4out distribution system with an integrated power supply and a built-in amplifier for passive terrestrial input. It can be used either with "Dual" or "Twin" LNB, switching between inputs is done by 13/18V from a receiver. The multi switch does not transmit 22... Rating: |
|
|
3x8 Multi-Switch (Powered)w/Antenna - 1 satellites in / 8 output The S.133-CP 3in/8out distribution system with SAT inputs switched by 13/18V has a built-in amplifier for terrestrial input. It can be used either with "Dual" or "Twin" LNB. The multi switch does not transmit 22 KHz signal for high band reception and does not pass 22 KHz tone... Rating: |
|
|
4x1 Diseqc + 1 Terr Weatherproof FTA Switch - 4 satellites in / 1 out The P.164-TW is a satellite switch in weatherproof housing for connection up to 4 satellite converters (LNBs) and terrestrial antenna. It is controlled from the receiver by "Position" and "Option" DiSEqc commands.... Rating: |
|
|
4x1 Diseqc Weatherproof FTA Switch - 4 satellites in / 1 out The P.164-IW 4in/1out is a DiSEqc 2.0 switch in weatherproof housing for connection of up to 4 satellite positions to one receiver. The inputs of the switch are controlled from a receiver by "Position" and "Option" commands and are through for 22 KHz and DiSEqc signals.... Rating: |
|
|
4x2 Diseqc Switch - 4 satellite in / 2 output **Sold Out** THIS MODEL IS DISCONTINUED. USE 2 SEPARATE EMP 4X1 DISEQC INSTEAD FOR SAME RESULTS AND LOWER COST.The P.167-W double satellite switch in weatherproof housing for connection of 4 satellite converters and controlled from receiver by DiSEqc commands. This unit is suitable for 2... Rating: |
|
|
5x4 Multi-Switch (Powered)w/Antenna - 2 satellites in / 4 output The S.142-CP is a 5in/4out distribution system switch with built-in amplifier for terrestrial input and integrated power supply. So, it is a four customer distribution system that can work with two dual or twin LNBs, quatro or Quad LNB. The multi switch allows connection of 4... Rating: |
|
|
5x4 Multi-Switch w/Antenna - 2 satellite in / 4 output The E.140-A 5in/4out distribution system with passive terrestrial input and with 4 SAT inputs. The switching is done by 13/18V and 0/22 KHz. It is equipped with a socket for optional connection of an external +18V DC power supply. This type is not compatible with quad... Rating: |
|
|
5x8 Multi-Switch(Powered)w/Antenna - 2 satellite in / 8 output The S.143-CP 5in/8out distribution system with a built-in amplifier for terrestrial input and an integrated power supply protected by a fuse. The multi switch can be used in connection with dual, twin, quatro or quad LNBs. SAT inputs are switched by 13/18V and 0/22 KHz from a... Rating: |
|
|
8x1 Multi-Switch - 8 satellites in / 1 output The P.168-W 9in/1out switch is designed for direct connection of up to 8 SAT IF inputs to one receiver. The inputs are selected by DiSEqC "Go to nn " (6B) or by DiSEqC 1.1 command. Additional input for terrestrial antenna allows to combine satellite and terrestrial signals into... Rating: |
|
|
9x4 Multi-Switch (Powered)w/Antenna - 4 satellites in / 4 output The compact P.154-CP multi switch is designed for customer's signal distribution installations from two satellite positions for 4 subscribers, including terrestrial radio and TV programs. This type is currently produced in CP version, i.e. with the possibility of switching... Rating: |
|
|
9x8 Multi-Switch (Powered)w/Antenna - 4 satellites in / 8 output The S.155-CP multi switch allows connection of 8 different LNBs signal (polarities). It has DiSEqc 2.0 distribution system for indoor use with integrated power supply that can work with quatro LNBs, or even with four dual or twin LNBs. The input level can be set by attenuators... Rating: |
|
|
Inline Satellite Amplifier The E.106 inline satellite amplifier is single (bullet) amplifier of SAT IF band, suitable for reception system where very long coaxial cable may cause drops in signal strength and quality. This amplifier is powered from a receiver via coaxial cable power and 22 KHz signal is... Rating: |
| Displaying 24 products |
















































